Led rod настенный светильник Simes

PRODUCT TYPE
Wall mounted luminaire. IP rating IP 65

MATERIAL CHARACTERISTICS
Fixing base in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosionresistance. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Mechanical resistance IK 08 Maximum load capacity --

LIGHTING PERFORMANCE
acid-etched polycarbonate diffuser 1,5 mm thick. Lamp fixed position. LOR --

INSTALLATION AND MANTEINANCE
Transparent silicone end caps. The LED circuit and aluminium profile can be easily cut to size. The aluminium profiles can be easily shortened by using a small hacksaw. The length of the LED circuit can be cut in 10 cm sections or multiples. After snapping the circuit with nippers it is imperative to re-position it in the center of the aluminium profile in order to obtain an optimal lighting effect. Example: in case of a window frame with 87 cm width, the 1 m rod will be cut to 87 cm while the LED circuit will be shortened to 80 cm (by clipping off the end opposite to the supply cable entry) and re-position the circuit into the center of the rod so to obtain a uniform distribution of light.

WIRING
Supply 0.3m cable section type H07RN-F. Isolation: CLASS III . Available colours: Anodized aluminium (cod.13). Weight: 0.4 Kg Glow Wire test: --
L.E.D circuit included.

This luminaire contains built-in LED modules with energy class: . In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012).

LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.
Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.